Latest News

Importance Of Exterior Stucco Toronto

By Betty Cole


Stucco is used to decorate houses and other related structures. Although it can be applied on inner side of a house, it is mainly applied on outer side of a house. Water, lime, Portland cement and sand are main items used during manufacture of stucco. Surface, which has been applied this substance does not only look attracting, but also durable. This commodity is normally applied while wet but it turns into a hard substance as it dries. This commodity is highly used during decoration of walls and even ceilings in houses. Exterior stucco Toronto conceals surfaces that are not attracting at all like those of concrete, adobe, cinder block or metal.

There are two main types of stucco. Modern type is made of water, sand and Portland cement. Traditional kind is made of water, sand and lime. At times, lime is added to modern type so as to increase its workability and permeability. Glass fibers and acrylics are at times added to both types so as to enhance their structural properties.

Breaking or chipping traditional type is a walk in the park. You need to apply a little force using a hand and intended results will be attained. Modern type is a little bit hard and also brittle. When applied on a surface, which is not stable can break or crack with ease. This type is generally grey in appearance. However, they appear in different colors nowadays.

In the olden days, traditional type was commonly used. It was applied on outer and exterior side of the house. One or two layers of this finish were applied on surfaces of masonry, stone or brick. It was used both as sculptural and artistic material. This finish was mainly used for architectural decorations in ancient cultures. Most people living in Toronto, Ontario prefer using modern type to decorate their houses. It is applied as finishing layer. It dries after a short period. Furthermore, working with modern kind is simpler than traditional one.

Stucco is generally durable and attractive. It is normally associated with Spanish-style homes. It is applied directly to concrete and brick primer. It can also be applied over metal siding or wood frame. Surface of this substance is painted with ease. However, applied paint is not long lasting and diminishes after a period of about two to three years. This means it requires to be reapplied now and then. There are different stucco textures. Some of these textures are discussed below.

Cat face is type of texture applied on wall surfaces of houses. These types are either synthetic or traditional. It varies greatly depending on its appearance. The type is classified further depending on space between two nearest inclusions. For this case, finish is mainly applied in two coats. A hand or even hopper gun may be used during its application.

Lace texture is used when hiding imperfections on sides of buildings. This texture is commonly used in both commercial and also residential structures. This is actually the most commonly used type. Another texture kind is called sand or float type. This finish is commonly applied on commercial buildings.

Smooth finish is usually very rare. However, people have realized its importance and its popularity is rising. Cleaning surfaces where this texture has been applied is not challenging. Another type that is closely related to smooth finish is Santa Barbara. This type makes surface appear smooth and also attractive.




About the Author:



0 Response to "Importance Of Exterior Stucco Toronto"